YB-7colors 420mmtower label flexo printing machine
TECHNBICAL STECHNBICAL
adhesive sticker flexographic printing machine Printing speed ：60m/min
Printing color ：7 colors
Max. unwinding width： 450mm
Max. Printing width ：420mm
Min. Printing width ：60mm
Max. unwinding diameter： 600mm
Max. rewinding diameter ：600mm
Precision of chromatography： ±0.10mm
Dimensions： L4.3M*W1.4M*H3.2M
Machine weight ：5300KG
Performance Characteristics:
1. adhesive sticker flexographic printing machine Main motor adopts imported frequency stepless speed regulator.
2. Unwinding,traction and rewinding are controlled by magnetic powder arrester,clutch and tension
inspector. Tension controller is automatic type.
3. Machine adopts ceramic anilox roller, which is characterized by wearable,rust-resistant and long using
life, etc.It can improve the printing efficiency.
4. Printing unit adopt plate register function,each veins roller can print independently,without effecting
others when leave it alone.
5. Each printing unit collocated with IR dryer, the UV dryer is optional.
6. The ink roller can break away automatically when machine stops,and it still run in a low speed avoid the
ink dry or asymmetric.
7. Unwinding and rewinding shaft adopt air shaft,it's convenient to change load and unload the material.
8. From material-feeding, printing, drying, glazing, laminating, molding, die-cutting, rewinding to
waste-collecting can be done in the same machine, the machine is known for machine characteristics such as
wide printing range, environmental ink, fast printing speed, convenient operation, high economic benefit and
so on. It's the best choice for note, paperboard and label printing factories.
Basic work principle:
The materials to printed enter the printing units with upper-middle-lower allocations through the printing ink
to the Anilox roller, and the scrape knife in the upper left or lower tight of Anilox roller will be transferred to
the printing roller. Then the ink transmission will be well done between the printing roller and the
press-roller. Finally the printed products will be finished through the rewinding unit.all of the roller will be
Teflon treatment ,it will protect the glue and it’s suitable for bopp tape printing.adhesive sticker flexographic printing machine
Pictures are for reference ：
After-sales Service
1.One Year Warranty,As long as there is a non-human fault in a year,free re-placement parts.
2.Parts Replacement,Don’t worry about the parts damaged or not sold after the machine is sold.we have a field factory with hundreds of enployees to serve you.
3.Engineer Asssignment,Lifelong maintentance,If your equipment breaks down,we will arrange engineers to repair it.
4.Online Instruction,We open online services,as long as your equipment failure,our engineers will be the first time for a one-to-one trou-bleshooting.
5.Feedback Survey,The engineer is required to bring a questionnaire to fill in the satisfaction with the engineer and the use of the equipment.
FAQ
Q: Where is your factory? How can I visit your factory?
A: Our factory is located In Rui'an Zhejiang province. We are warmly welcome you visit our Factory if you have a travel plan.
Q: How can I know your machine is designed for my product?
A: If you don't mind, you can send u sample and we test it on the machine. During that time, we will take video and clearer
picture for you. If chance, we can take video online and show u.
